HEATING COOLING MIXER (VERTICAL)

JOGINDRA Heating Cooling Mixers have the proven record of being the best in performance and are highly acclaimed in the Plastic Industry. The mixers are used in processing of dry blend in the area of Rigid and Plasticized PVC, thermoplastics, ABS, PE, PP for drying Blending & Wet Coating, Ceramics, Dyes and Colours, Pharmaceuticals and other allied industries.
It is a combination of High Speed Mixer and Cooling Mixer. The material in high speed mixer during mixing operation is heated by utilization of frictional heat and then transferred to the cooling mixer in order to always keep it in free flowing conditions, suitable for storage, transport and subsequent process.

MODEL BATCH
CAPACITY
KGS.		 VESSEL CAPACITY (LTRS.) DRIVE (K.W.) NO. OF
BATCH
PER HR.		 MIXING
TIME
(Min.)		 MIXING TOOL SPEED R.P.M. MAX. PRESSURE IN DOUBLE JACKET (BAR)                       AIR SYSTEM OPERATING AT (BAR)
HIGH
SPEED
MIXER		 COOLING MIXER HIGH SPEED MIXER COOLING MIXER HIGH SPEED MIXER COOLING MIXER HIGH SPEED COOLING
DUAL
SPEED		 SINGLE
SPEED		 SINGLE SPEED SINGLE SPEED DUAL SPEED SINGLE SPEED
JHC-125 40-55 150 350 15/18 18.5 5.5 4-6 6-9 900 550/1100 120 2.5 1.0 4-5
JHC-125P 40-55 150 350 18/21.5 22 5.5 4-5 8-12 900 500/1000 120 2.5 1.0 4-5
JHC-175 65-80 200 450 26/31 30 7.5 4-6 6-9 850 500/1000 110 2.5 1.0 4-5
JHC-175P 65-80 200 450 32/38 37.5 7.5 4-5 8-12 850 500/1000 110 2.5 1.0 4-5
JHC-250 90-100 250 650 38/45 45 11 4-6 6-9 840 450/900 110 2.5 1.0 4-5
JHC-250P 90-100 250 650 46/55 55 11 4-5 8-12 840 420/840 110 2.5 1.0 4-5
JHC-350 120-150 350 1100 46/55 55 15 4-6 6-9 700 360/720 96 2.5 1.0 4-5
JHC-350P 120-150 350 1100 63/75 75 15 4-5 8-12 700 360/720 96 2.5 1.0 4-5
JHC-500 160-200 500 1250 56/82 90 18.5 4-6 6-9 550 300/600 96 2.5 1.0 4-5
JHC-500P 160-200 500 1250 78/115 110 18.5 4-5 8-12 550 300/600 96 2.5 1.0 4-5
JHC-750 280-300 750 1550 90/132 132 18.5 4-6 8-12 500 260/520 96 2.5 1.0 4-5
JHC-1000 400-430 1000 2100 140/190 180 22 4-6 8-12 500 260/520 96 2.5 1.0 4-5

JHC       Suitable for Rigid PVC formulation
JHC P    Suitable for Plasticized formulation

Note :

  1. The mix weights are valid for PVC formulae with an apparent density of 0.5 kg/l inclusive of additives and final temperature of 120° C of Heating Mixer and 45° C for Cooling Mixer and for plasticized PVC with a percentage of plasticizers not greater than 40 p.h.r.
  2. Direct current motors, frequency variators, or soft-start can be fitted to all models on request.
Heating Cooling Mixer (Horizontal) High Speed Mixer Cooling Mixer (Vertical) Cooling Mixer (Horizontal) Ribbon Blender Container Mixer Conveying System

HomeAbout UsFeedbackContact Us